G3云台手持件安装说明书
产品平面图
手持件可90°调节
UP
Down
Battery×3
电池×3
云台4芯连接线
4 pin gimbal connection
wire
Down
Up
+
-
Motor control and power
interface
电机控制与电源接口
扭开电源盖，把电池放入电池仓中。
电源开关
铰链座
铰链座
M5×
16滚花手拧螺钉
M5×16滚花手拧螺钉
M2×
6沉头螺钉
M2×
6 Sunk Screw
产品安装图
M2×6
可充电电池
型号: 16430
容量: 1800mA
+
-
-
+
Charger
Input: AC 100V-240V 50/60Hz
Max 150mA
Output: DC 4.2V 600mAh
WARNING:
To prevent it from fire or moisture.
To reduce the risk of electronic shock.
Do not remove cover (or back plate).
If any parts need repair, consult an
authorized service dealer.
90°
G3 Steadycam Installation Instructions
Product Plan
Product Installation
Diagram
Hinge Mount
Hinge Mount
Open power switch cap, Put batteries in holder.
Power Switch
为了防止火灾或受潮。
以及减少触电的危险。
请不要打开护盖。
如有零部件需维修, 请咨询授权
服务代理商。
充电器
输入: AC 100V-240V 50/60Hz
最大输入:150mA
输出: DC4.2V 600mAh
Rechargeable Battery
Type:16430
Capacity:1800mA
Steadycam can be adjusted
to 90°
Knurled thumb screw
Knurled thumb screw