请先安装好Gopro3相机后，再通电。
Attention!
Please install the Gopro3 camera
firstly ,then supply power.
M2×22
Knurled Thumb
Screw
M2
×22滚花手拧螺钉
Battery×3
电池×3
扭开电源盖，把电池放入电池仓后，按下电源开关，即可启动3轴云台。
电源开关
Open power switch cap, place the batteries in the handheld, press the power
switch after fit on the power switch cap, the 3 axis Gimbal can be activate.
Power Switch
Gopro3安装图
Gopro3 Installation Diagram
用于切换云台操作模式，具体方法参
见：带指示灯的按钮功能健。
1
2
3
4
（通过改变指示灯闪烁来识别云台操
作模式）
USB接口
USB接口
用于连接电脑升级最新的三轴手持
稳定云台固件。
Use to connect the computer to
upgrade the latest firmware.
1.
航向跟随模式：俯仰和横滚锁定，航向随着手持的方向平滑的
转动。
2.
航向和俯仰跟随模式：横滚锁定，航向和俯仰的方向随着手持
的方向平滑的转动。
3.
锁定模式：航向、俯仰和横滚都锁定。
1.
Heading Following Mode：Pitch and roll locking, heading
smooth rotation follow the direction of the handheld.
2.
Heading And Pitch Following Mode：Roll locking ,
heading and pitch smooth rotation follow the direction
of the handheld.
3.
Locking Mode：Heading ,pitch and roll locking.
调整俯仰角拍摄的技巧：
先双按功能健，进入航向和俯仰跟随模式，调整姿态让俯仰轴随动到想要的角度上，然后单按功能健，就可以锁定俯仰角度，进入航向跟随模式。
G3Ultra 三轴手持稳定云台（适用于Gopro3和）
Interface And Button
接口和按键
Item
Double Press
Single Press
Long Press For 1 Second
Button With Indicator Light Function :
LED Status
Single Flashes
Double Flashes
Stay On Constantly
Function Explanation
Heading following mode
Heading and pitch following mode
Heading,pitch and roll are all locked
动作方式
连续两次按下
单次按下
长按1秒
带指示灯的按钮功能健：
指示灯状态
单次闪烁
双次闪烁
常亮
功能说明
航向跟随模式
航向和俯仰跟随模式
锁定模式（航向、俯仰和横滚都锁定）
功能介绍
Function Instruction
5
操作技巧
6
状态指示灯说明
Indicator Explanation
功能键
P C
The Skills Of Adjusting Pitch :
Double click the button first to be in heading and pitch following mode. Adjust the attitude to move the pitch to the angle you want ,
then press the button once to lock the angle of pitch being in the heading following mode .
Autodyne Mode:
Trun 180 degree of the gimbal(the USB port facing you). Adjust the angle of pitching through the method above, then you can autodyne easily.
自拍模式：
手握的时候，把手柄调转180度（USB口正对自己），根据手持的高度，通过上面的方法调整俯仰角度，然后就可以方便的自拍了。
3 Axis
指示灯
Indicator
Indicator
Indicator
指示灯
指示灯
状态指示灯说明
指示灯状态
说明
蓝色3次闪烁
蓝色2次闪烁
蓝色1次闪烁
蓝色快速闪烁
电池电量充足
电池电量尚可
电池电量低
电池没电，需要充电
Indicator Explanation:
LED Status
Explain
Blue light flashes three times
Blue light flashes twice
Blue light flashes once
Blue light keeps flashing
Full power
Enough power
Low power
No power
Button
Button
(Identify the operation mode via switch
to different status of the indicator light)
Use to switch operation mode of the
Gimbal, specific method please refer
to: Button with indicator light function
功能健
USB Interface
USB Interface
Operation Skill
