1
Installation Instructions for
For Model OL13603 Only:
Temporarily install the mounting plate to the junction box.
For Model OL13603 Only:
Mark the anchor hole locations on the mounting plate and remove the mounting plate.
For Model OL13603 Only:
Drill appropriate size holes at the marked locations and install the anchors.
Secure the mounting plate to the junction box.
For Model OL13603 Only:
Screw the anchor screws into the anchors.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure it with the fixture screws.
Insert the glass panels into the shade and secure them in place using the panel brackets and screws.
Install the shade onto peg on the fixture and install the washer and thumb screw. Fully secure the shade to the fixture
using the shade screws.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
For wet locations, caulk around the base of the fixture with waterproof construction sealant.
1
2
3
4
5
CAUTION RISK OF FIRE
-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Chappman Outdoor Wall
1.0
OL13600-OL13601-OL13602-OL13603
O 13600, OL13601, O 13602, O 13603
L
L
L
Outdoor
1A
JUNCTION BOX
MOUNTING
PLATE
7
8
FIXTURE
SCREW
6
7
8
13
FIXTURE
BASE
G
P
I
:
ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing
compliant junction
NEC
boxes.
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED
LED
lamps may be dimmed with a
dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
9
11
9
10
ANCHOR
ANCHOR
SCREW
FIXTURE
SOCKET
LAMP
PANEL SCREW
AND BRACKET
GLASS PANEL
SHADE
WASHER AND
THUMB SCREW
SHADE SCREW
11
12
13
3
5
10
11
11
