background image

1

Installation Instructions for

For Models OL13301 and OL13302 Only:

Temporarily install the mounting plate to the junction box.

For Models OL13301 and OL13302 Only:

Mark the anchor hole locations on the mounting plate and remove the mounting

plate.

For Models OL13301 and OL13302 Only:

Drill appropriate size holes at the marked locations and install the anchors.

Secure the mounting plate to the junction box.

For Models OL13301 and OL13302 Only:

Screw the anchor screws into the anchors.

Connect the fixture to a suitable ground in accordance with local electrical codes.

Connect the white fixture wire to the neutral power line wire with a wire nut.

Connect the black fixture wire to the hot power line wire with a wire nut.

Mount the fixture base onto the mounting plate and secure it with the fixture screws.

Insert the glass panels into the fixture and secure them in place using the clips.

Install the cover on top of the fixture and secure it using the cover screws.

Install the fixture loop to the top of the cover and secure it in place with the fixture loop screws.

Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.

For wet locations, caulk around the base of the fixture with waterproof construction sealant.

1

2

3

4

5

CAUTION RISK OF FIRE

-

This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.

Use minimum 90°c supply conductors.

1.0

OL13300-OL13301-OL13302

O 13300, O 13301, OL13302

L

L

Outdoor

1A

JUNCTION BOX

MOUNTING

PLATE

7

8

FIXTURE

SCREW

6

7

8

14

FIXTURE

BASE

G

P

I

:

ENERAL

RODUCT NFORMATION

These fixtures are intended to be installed utilizing

compliant junction

NEC

boxes.

This product is safety listed for wet locations.

Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED

LED

lamps may be dimmed with a

dimmer. Consult lamp manufacturer for

additional information.

This instruction shows a typical installation.

9

10

ANCHOR

ANCHOR

SCREW

11

12

13

3

Hodges Outdoor Wall

14

FIXTURE

LAMP

GLASS PANEL

COVER

COVER
SCREW

12

11

13

5

FIXTURE LOOP

FIXTURE
LOOP SCREW

10

11

CLIP

11

Содержание OL13300

Страница 1: ...re loop to the top of the cover and secure it in place with the fixture loop screws Screw the lamp into the socket Refer to the label on the socket for Max Wattage Information For wet locations caulk around the base of the fixture with waterproof construction sealant 1 2 3 4 5 CAUTION RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person famili...

Страница 2: ...de avec un écrou de fil Montez la base de luminaire sur la plaque de montage et le fixer avec les vis de luminaire Insérez les panneaux de verre dans la luminaire et les fixer en place à l aide des agrafes Installer le couvercle sur le dessus de luminaire et le fixer en utilisant les vis de couvercle Installez la boucle de luminaire à la partie supérieure de couvercle et le fixer en place avec les...

Страница 3: ...nte con una tuerca para cable Monte la base de lámpara sobre la placa de montaje y fijarlo con los tornillos de lámpara Inserte los paneles de vidrio en la lámpara y fijarlos en su lugar con los broches Instale la cubierta en la parte superior de la lámpara y fijarlo usando los tornillos de la cubierta Instalar el bucle de la lámpara de la parte superior de la cubierta y fijarla en su lugar con lo...

Страница 4: ...ie 160077 IL 800 969 3347 www Feiss com 2017 Feiss All rights reserved The Feiss graphic is a registered trademark of Feiss Feiss reserves the right to change specifications for product improvements without notification A Generation Brands Company ...

Отзывы: