1
Installation Instructions for
McHenry Outdoor Flush Mount (LED)
1.0
OL12813-LED
Outdoor
OL12813-LED
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Place the fixture base onto the mounting plate studs and secure it with the two cap nuts.
Install the outer glass panels by inserting them into the fixture and securing them with the brackets and bracket screws.
Install the fixture to the fixture base by screwing the fixture screws into the hex nuts in the fixture base.
Place the diffuser, rubber washer, and steel washer onto the threaded pipe (in that order) and secure in place with the hex nut.
Screw the finial onto the threaded pipe.
1
2
1A
1
3
4
1
OUTER GLASS PANEL
5
MOUNTING PLATE
FIXTURE BASE
G
P
I
:
ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing
compliant
NEC
junction boxes.
This product is safety listed for damp locations.
For a complete list of dimmers, visit out website at
www.Feiss.com
CAUTION RISK OF FIRE
-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
BRACKET
FIXTURE SCREW
FIXTURE
DIFFUSER
RUBBER WASHER
HEX NUT
STEEL WASHER
FINIAL
BRACKET SCREW
CAP NUT
5
1
4
6
MOUNTING PLATE STUD
3
5
7
8
9
6
6
7
7
8
9
JUNCTION BOX
THREADED PIPE
HEX NUT
