Milling
34130534060
Printed in Germany
Disassembly
C-SC_CSSM
Version 1.0
16.04.2020
Page
20
of
68
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Removing the drive shaft
Steps that must be completed:
-
Removing the guide plate unit
-
Removing the handle
-
Removing the gearbox unit
Tools:
-
Torx T15
-
Puller
-
Mounting device 64122134000
-
Circlip pliers
-
Slotted screwdriver
-
Hook and pin wrench 58/62
-
Pipe, 75 mm outer diameter, 72 mm inner diameter, length 80 mm
1.
Remove the circlip (
1
).
2.
Remove the washer (
2
).
I
NFORMATION
Use a new circlip for assembly each time.
3.
Unscrew the four screws (
3
).
I
NFORMATION
Warm up the screws using a hot air gun because they have
been glued in with a thread locking compound.
2
1
3
