19
en
Adjustments.
Before mounting or replacing cutting tool or accessories, pull the power plug.
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Adjusting the height (figure 8).
KFH 17-8(**):
Pull the locking lever toward
the rear and turn the ring in the desired direc-
tion. Once the desired value is set, release the
locking lever again.
KFH 17-15(**):
Pull the locking lever toward
the rear and loosen the wing bolt. Turn the
ring in the desired direction. Once the desired
value is set, tighten wing bolt again and
release the locking lever.
WARNING
Fig. 8
15
14
13
1
2
3
0,1mm
1/254
“
5/16“
8
mm
5
2
0
0
CLICK
15
14
13
1
2
3
10
15
mm
5
2
0
0
2
2
2
10/16“
0,1mm
1/254“
CLICK
0,1mm
1/254
“
5/16“
8
mm
5
2
0
0
15
1
2
3
10
15
mm
5
2
0
0
2
2
2
10/16“
0,1mm
1/254“
15
1
2
3
1.
2.
2.
3.
KFH17-8 (**)
1.
3.
3.
4.
2.
5.
KFH17-15 (**)
