Metal Core Drilling
Fitting
C-SC_CSSM
Version 1.0
01.04.2019
Page
71
of
75
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.3.8 Positioning the connecting cable
Steps that must be completed:
-
Fitting the gearbox parts
-
Positioning the shaft
-
Fitting the motor housing
-
Fitting the armature
-
Fitting the intermediate gear box
-
Positioning the intermediate gear box
-
Positioning the motor housing
-
Positioning the carbon brushes
-
Positioning the drill motor
Tool(s):
-
Torx T15
1.
Position the circlip (
1
).
2.
Connect the two strands (
2
) as shown in the connection
diagram.
3.
Position the cover (
3
).
4.
Screw in the two screws (
4
) [1.6 Nm
±0.25 Nm
].
5.
Position the cable clamping piece (
5
).
6.
Screw in the screw (
6
) [1.6 Nm
±0.25 Nm
].
2
5
6
4
3
1
