Fein ASt638, Оригинальное руководство пользователя

Страница: 12 / 117

12
en
en Original Instructions for Jigsaw.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Observe the instructions in the text or graphic opposite!
Do not touch the saw blade.
Before commencing this work step, pull the mains plug out of the socket. Otherwise there will
be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
A surface that can be touched may be very hot and thus hazardous.
Additional information.
Gripping surface
Confirms the conformity of the power tool with the directives of the European Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Product with double or reinforced insulation
Max. work-piece thickness for steel with up to 400 N/mm
2
Max. work-piece thickness in steel (INOX)
Max. work-piece thickness for aluminium with up 250 N/mm
2
Max. work-piece thickness in softwood
Max. work-piece thickness in hardwood and plywood
Max. work-piece thickness in copper/brass
Max. work-piece thickness in fibreglass/hard particle materials
Radius of smallest curve in steel, wood/plastic
Low stroke rate
High stroke rate
WARNING
Fe 400
Fe INOX
Al 250
Cu, Ms
GFK
r
Character Unit of measurement,
international Unit of measurement,
national Explanation
P
1
W W Power input
P
2
W W Output
n
0
/min, min
-1
, rpm, r/min rpm Stroke rate at no-load
U
V V Rated voltage
f
Hz Hz Frequency
OBJ_BUCH-0000000096-001.book Page 12 Wednesday, September 5, 2012 12:06 PM