OBID
®
classic-pro
Installation
ID CPR.02.VP/AB-x
FEIG ELECTRONIC GmbH
Page 27 of 36
M30800-1de-ID-B.doc
3.1 Jumper and Switches
Fig 5 shows the position of the jumpers and switches on the printed circuit board of the ID CPR.02
The jumpers and switches are only accessible at the opened device.
1 2 3 4 5 6 7 8
ON
OFF
X7
1
J1 J2
X1
S1
3 2 1
X4
X3
X2
Fig 5: Jumper and Switches
S1:
DIP-switch to configure the Reader address.
X1:
Terminal for sticking up the connection board.
X2 / X3 / X4:
Jumper for termination resistors of the RS485 interface (only ID CPR.02.VP/AB-B).
X7:
Interface for firmware update.
J1 / J2:
Jumper for firmware update.