Feig Electronic ID ECCO Smart HF-BLE, Руководство пользователя

Страница: 14 / 25

IDENTIFICATION ID ECCO Smart HF-BLE Project Notes
USER GUIDE Page 14 of 25
6.3 BLE Reader profile
The ID ECCO Smart BLE profile of the reader supports 6 different BLE services with 16 different BLE
characteristics.
The Service “
NFC Reader Service
” is a part of the standard Zhaga “Book 25”. For further
information contact the Zhaga Consortium at https://zhaga.org/
Table 1: Bluetooth Low Energy Services of ID ECCO Smart BLE profile
The FEIG UART Service is used to transmit the FEIG Advanced Protocol. This BLE Service is used at the
FEIG SDK’s and DLL and is compatible with the FEIG serial Interface.
Also the product ID BLE.USB Dongle support this Services
The Bluetooth Low Energy specifications and listed services see https://www.bluetooth.com
See
“
Book 25
”
from the Zhaga database (Available for Zhaga Members, only)
Service Name Characteristic Name Service UUID Supported Properties
Generic Access 0x1800
Device Name
READ
WRITE
Appearance
READ
Peripheral Preferred
Connection Parameters
READ
Device Information
0x180A
Manufacturer Name String
READ
Model Number String
READ
Serial Number String
READ
Hardware Revision String
READ
Firmware Revision String READ
Generic Attribute 0x1801
Service Changed
INDICATE
Battery Service 0x180F
Battery Level
READ
NOTIFY
FEIG UART Service 2d8f4660-8acb-11ea-ab12-0800200c9a66
FEIG Reader input WRITE
WRITE without response
FEIG Reader output
READ
NOTIFY
INDICATE