Identifikationssystem OBID ®
Installation Manual Shield antenna
FEIG ELECTRONIC GmbH
M00102-0e-ID.doc
page 7 of 8
Security- and warning instructions- please read before initiation!
=
The appliance has to be used only for the purpose designed by the manufacturer.
=
The installation manual has to be stored available at any time and has to be handed over to each user.
=
Unauthorized changes and the use of spare parts and additional appliances which have not been sold or recommended
by the manufacturer may cause fire, electric shocks or injuries. Such measures will lead to exclusion of any liability by
the manufacturer.
=
The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the appliance. The
manufacturer is not legally responsible for incorrect, unsuitable manual or automatical setting of parameters for an
appliance or the incorrect application of an appliance
.
=
Repairs can only be executed by the manufacturer
.
=
Installation-, operation- and maintenance procedures should only be carried out by qualified personnel trained for
accident prevention
.
=
When working with appliances with leading parts, please observe the valid security prescriptions
.
=
Before opening the appliance, the power supply must always be interrupted. Make sure that the appliance is without
voltage by measuring.
=
CAUTION! The fading of an operation control (LED) is
no indicator for an interrupted power supply or the appliance
being without voltage!
=
Working with the opened appliance, please consider that leading parts near the transformer, the relays and the
connector terminal are bare.
=
Works at the appliance and its installation have to be executed according to the national legal requirements and local
prescriptions
.
=
The user is responsible for the installation, application and connecting of the appliance according to the technical
standards of the installation country and other valid prescriptions. Dimensions of wires and cables, safety regulations,
earthing, separation, insulation control and overcurrent protection have to be considered in particular.
