⚫
Make certain that the switch is in the "OFF" position before connecting plug to a power source.
⚫
Stay alert
—never operate the unit when tired or under the influence of drugs, alcohol, or medication.
⚫
Do not use it in dangerous environments. Do not use near flammable substances, in damp or wet
locations, or exposed to rain.
⚫
Never plane material which is shorter than 304.8 mm (12") narrower than 19.05 mm (3/4"), or wider
than 304.8 mm (12") or thinner than 12.7 mm (1/2").
⚫
Exhaust chute: remove shavings with brush or vacuum after power has been shut off and
cutterhead has stopped rotating.
⚫
Always locate the planner with proper clearance on the outfeed side of the unit to prevent pinching or
binding of the workpiece against any obstacle.
WARNING: We recommend the use of a residual current device with a residual current
rating of 30mA or less.
•
Check the settings of the protection and the springs during assembly, so that the device is in perfect
condition before use.
•
Use blades that are well sharpened and maintained.
•
Use only cutting blades designed for this machine.
•
Any part of the tool not used for planning should be adjusted to protect it.
•
Inspect anti-kickback devices and spindle feed speeds to ensure safe operation.
•
Wear protective gear, which may include:
o
Hearing protection, to reduce the risk of induced hearing loss.
o
Respiratory protection, to reduce the risk of inhaling harmful dust,
o
Gloves for handling the cutting block and raw materials, to reduce injuries from sharp edges.
2.3 RESIDUAL RISKS
In spite of the application of the relevant safety regulations and the implementation of safety devices,
certain residual risks cannot be avoided. These are:
⚫
Impairment of hearing
⚫
Risk of personal injury due to flying particles.
⚫
Risk of burns due to accessories becoming hot during operation.
⚫
Risk of personal injury due to prolonged use.
⚫
Risk of dust from hazardous substances.
2.4 WARNING SYMBOL
WARNING! To reduce the risk of injury, the user must read the instruction manual
before use.
Wear ear protection.
Wear safety glasses or goggles.
Wear a dust mask.
5
