8
Information
The declared vibration total value has been measured in accordance with a standard test method and may be used
for comparing one tool with another;
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning
The vibration emission during actual use of the power tool can differ from the declared total value depending on the
ways in which the tool is used; and
It is necessary to identify safety measures to protect the operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to the trigger time).
Wear hearing protection
4. USE
1)
Intended use
This angle grinder is designed for grinding and roughing metal such as metal or stone. The tool can be used also
as a cutting off tool by using the correct disks. The capacity of the tool is 230mm maximum.
Do not use this tool for commercial purposes; it is only for a private household use.
Use only discs for grinding and cutting.
2)
Before the first use
Check if the package is complete and not damaged. If some parts are missed or are damaged, please do not
use the tool and bring it back to your dealer.
3)
Assembly
WARNING: The tool must be always switched off and unplugged before assembly!
-
Installation of the disk
o
Place the inner flange on the spindle.
o
Place then the corresponding disk.
o
Place the outer flange the disk and screw it firmly with the pin wrench.
NOTE: The tool is delivered without grinding disc; see your dealer to buy recommended disc with this
tool.
Following the disk, the outer flange can be installed on the two sides:
