Feider Machines F405SC3F, Оригинальное руководство пользователя

Страница: 9 / 13

3.
ASSEMBLY
NOTE: The tool must not be plugged to electrical supply when assembly.
a.
Fixing of the saw
-
The base of the scroll saw must be placed and
secured on a solid, level surface in a place that
is not accessible to children. Fasten the drum
with 3 nuts and bolts through the 3 holes
provided for this purpose.
-
Each foot must be firmly secured with bolts (not
supplied)
-
The bolts must be long enough to take into
account the thickness of the work surface on
which the saw is attached. Use "brake"
washers (not supplied) and place the clamping
nuts under the worktop.
-
The dimensions of the work surface must be
sufficient to prevent the overturning of the
assembly during work
-
WARNING: Ensure the stability and robustness
of the worktop before any work.
b.
Setting of the angle table
Loosen the table angle lock knob.
Select an angle from 0 to 45 ° and tighten the
locking knob.
c.
Installation of the guard
-
Insert the guard inside the pulley as shown in the picture
on the right.
-
Align the protector correctly in front of the hole in the
pulley to insert the nut.
-
Once the nut is inserted, tighten using the washer and the
screw.
-
Screw firmly.
-
Check for proper sliding up / down of the guard