FEI Quanta FEG 250, Руководство пользователя

Страница: 116 / 228

Stages: Stages Types and Accessories
7-2
Stages Types and Accessories
QUANTA FEG 250 – 50 mm STAGE
The stage has the X, Y, Z, and Rotation movements motorised, all
with a manual override and the manual Tilt movement. All movements
are read out on the screen, under software control.
The Z coordinate can be controlled by the external 25 mm Z control
and / or by the 25 mm internal (sample holder) setting. This allows to
load large or differently sized specimens by reducing the internal Z.
FIGURE 7-1 QUANTA FEG 250 STAGE (4 AXES MOTORISED)
Quanta FEG 250 Standard Sample holder
The single stub holder and the multiple holder are provided with the
Quanta FEG 250. The single holder has a spring clip fitting and a
secure-fitting screw. The multiple holder is a 7-stub holding disc with a
spring clip fitting only.
FIGURE 7-2 QUANTA FEG 250 STANDARD SAMPLE HOLDERS
Both holders have the same threaded shaft which screws into the
stage rotation head center and can be securely attached to the stage
by means of the conical locking piece.
Legend:
1 = Tilt lever
2 = Tilt monitor
3 = X axis
4 = Rotation
5 = Z axis
6 = Y axis A = Negative end stop
B = 30° stop
C = 45° stop
D = 75° stop
E = Tilt scale
F = Stage lock
G = Stage ground