25
Specifications
Description, Specifications, and Installation Manual
POT Settings
Table 20 POT Settings on the Control board
R69
Output level for 10 V/25 V and 8 Ω, 0.7 W Audio outputs,
(Default = Turn clockwise 20 turns or all of the way up.)
R103
Digital Voice Gain,
(Default = Turn clockwise 20 turns or all of the way up.)
Table 21 POT Settings on the Amplifier board
VR1
Volume Control,
(Default = Turn clockwise 20 turns or all of the way up.)
Environmental and Physical
Table 22 Environmental and Physical
Operating temperature range
-22
°
F to +150
°
F/-30℃ to + 65℃
Humidity
0-95%, non-condensing
Control cabinet (H x W x D)
20.36 in x 16.30 in x 6.62 in
51.7 cm x 41.4 cm x 16.8 cm
UVRI-B (Weight without radio)
41.4 lb/18.8 kg
Net Shipping Weight
45.4 lb/20.6 kg
UVRI-BH and UVRI-BU (Weight with radio) 44.6 lb/20.2 kg
Net Shipping Weight
48.6 lb/22.0 kg
UVRI-B100 (Weight with amplifier)
44.8 lb/20.3 kg
Net Shipping Weight
48.8 lb/22.1 kg
UVRI-BH100 and UVRI-BU100
(Weight with radio and amplifier)
48.0 lb/21.8 kg
Net Shipping Weight
52.0 lb/23.6 kg
Software Tests
Table 23 Software Tests
Power-up System Test
Function of SDmicro card.
Card is present and can be read from.
Quiet Test
25 V output at least 20 V
rms
.
Audio channel status.
Performed on command and polled for results.
Sounding Functions/P.A./
Digital Voice
TC1 Contact loop back from TC1 Relay outputs K4, K3, K2,
and K1 (JP18) to fire panel (TC2) and from fire panel to TC1
inputs (JP14).
TC1 Audio loop back from (JP10) to fire panel to (JP9).
Performed during activations and polled for results.
Low Battery
Battery voltage less than 11.3 V
Auto reports.
AC Power Fail
AC voltage less than 90 V.
If in 240 Vac mode, 180 V.
Auto reports.
Charger Fail
Charge voltage drops below 8.7 V.
Auto reports.
