Federal Signal Corporation SmartSiren Platinum Series, Руководство пользователя программного обеспечения

Страница: 72 / 117

Configuring the Internal Relays
72
SmartSiren Platinum Series
Relay Default Settings
Before you begin, you may want to review these relay default settings. For an keypad view of the default
settings, see the table in the appendix on page 115.
Button Relay Button Control Relay Function Active State Off State
Button 1 Active H/L
Relay 6
Push On/Off Steady On Active High Open Off
Button 2 Active H/L
Relay 7
Push On/Off Steady On Active High Open Off
Button 3 Active H/L
Relay 8
Push On/Off Steady On Active High Open Off
Button 5 Active H/L
Relay 10
Security Timer:
8 Seconds
Steady On Active High Open Off
Button 8 Active H/L
Relay 9
Push On/Off Steady On Active High Open Off
Configuring the Internal Relays (Buttons 1 to 15 and Inputs)
To assign a relay function to a button:
1. Click a button in the Button Configuration Module .
NO
TE
Button Function Limits
The functions for all buttons (except Slide Switch 3 , which accepts a limit of
20) are limited to a maximum of 10.
2. If the Relay pane is not in front of the other Device Selection panes, click the Relay tab.