23
Installation
Description, Specifications, Installation, and Service Manual
Federal Signal
www.fedsig.com
Installing the Side Light Kit
The Side Light Kit is installed on the bottom (inactive) module. See Figures 9 and 10.
To install the Side Light Kit:
1. Replace the standard driver access doors with the side light mounting doors.
2. Wire the four side lights to the two spare wires from the wire harness within the
module. Connect the wires (four red and one pink positive) together with a wire nut.
Connect the black wires (five black negatives) together with a wire nut. Zip-tie the
wires to the pole.
Figure 9 Side Light
Table 15 Side Light Kit (Model MOD-QF-KIT)
Item No. Qty. Description
Part Number
100
4
Door, Driver Access, QF MNT
857000018A-01
101
4
QuadraFlare
®
LED, 24 V, Red
QL64-24RR-ANS
102
16
Screw, Machine, 6-32, Phillips
®
, Stainless Steel 7000A427-28
103
16
Nut, Hex, Ext KEPS
®
, 6-32
7058A046
104
4
QL64, Radiused Wedge, Gasket
801201900A
Figure 10 Side Light Wiring
