-4-
f.
Install the new strobe tube assembly in
the finished reflector, and turn the assembly clock-
wise to lock it into the finished reflector.
g.
Replace the lens and secure with the
previously removed screws.
h. Reconnect all power connections to the
power supply and test for proper operation.
E. REPLACEMENT PARTS.
Description
Part No.
Lamp, 35 Watt Halogen
8107165
Lamp, 25 Watt Halogen, G4
8107156
Strobe Tube Assy., VAMA
8107157
Socket, Lamp and Cable Assy.
8575029
Lens, Blue, Smooth
8575030
Lens, Blue, Fluted
8575030-01
Lens, Red, Smooth
8575030-02
Lens, Red, Fluted
8575030-03
Lens, Amber, Smooth
8575030-04
Lens, Amber, Fluted
8575030-05
Lens, Clear, Smooth
8575030-06
Lens, Clear, Fluted
8575030-07
Lens, Gasket
8575031
SAFETY MESSAGE TO OPERATORS
Peoples’ lives depend on your safe use of our
products.
Listed below are some important safety instruc-
tions and precautions you should follow:
•
Although your warning system is operating
properly, it may not be completely effective.
People may not see or heed your warning
signal. You must recognize this fact and
continue driving cautiously.
•
Also, situations may occur which obstruct
your warning signal when natural or man-
made objects are between your vehicle and
others, such as: raising your hood or trunk
lid. If these situations occur, be especially
careful.
•
At the start of your shift, you should ensure
that the light is securely attached and oper-
ating properly.
Failure to follow these safety precautions may
result in property damage, serious injury, or death to
you, to passengers, or to others.
RETAIN AND REFER TO THIS MESSAGE