Feasycom FCS-BT671, Руководство пользователя

Страница: 5 / 15

5
1. Read module’s BR/EDR local name
<< AT+NAME
>> +NAME=Feasycom
>> OK
2. Write a baudrate which is not supported
<< AT+BAUD=0
>> ERROR
1.5 Indication Format
<CR><LF>+ Indication {=Param1{, Param2{, Param3...}}} <CR><LF>
⚫
All indications start with <CR><LF>, end with <CR><LF>
⚫
If indication has parameter, parameter k eep behind “=”
⚫
If indication has multiple parameters, parameter must be separated by “,”
e.g.
1. Received “1234567890” fr om node 4315
>> +DATA=4315,CA00,10,1231231231
1.6 Module Default Settings
Physical UART Setting 115200/8/N/1
2. Command Table
2.1 General Commands
2.1.1 UART Communication Test
Format : AT
Response : OK
Description : Test the UART communication between HOST and Module after power on,
baudrate changed, etc.
Example : UART communication test
深
圳
市
飞
易
通
科
技
有
限
公
司