Feasa Low Light LED Analyser Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 74

Feasa Low Light LED Analyser Скачать руководство пользователя страница 14

FEASA LED ANALYSER LOW LIGHT
FUNCTIONAL VERSION

Capture Commands

The Capture commands are used to capture the parameters (color, intensity, xy, uv,
wavelength, cct) of the LED's to be tested and store the results in the memory of the Analyser.

These results can be read out later using the

GET DATA

commands.

Commands are transmitted and received using ASCII characters and are

NOT case-sensitive

.

All commands must be terminated with a

<CR>

or

<LF>

character. All responses from the

Led Analyser are also terminated with <

CR

> <

LF

>

The

Terminal Program

supplied on the CD is used to send/receive commands to/from the

Analyser. This program is also available as a drop down function of the

USER

and

Test

Software programs.

The

Feasa

LED Analyser User

Program is a graphical tool that can be used to send

commands and receive results from the Analyser. It allows one LED to be tested at a time.
This Program also allows a Terminal Window to be opened so that the User can type the

commands directly and send them to the Analyser. The responses from the Analyser can be
observed in the Window.

The

Feasa LED Analyser Test

Program allows the User to test all the LED's together. Pass

and Fail limits can be set and results can be printed and logged.

Alternately, the User may generate a customised Program that sends commands and receives
data through the virtual USB Com Port.

Back to Index

14

«
...
12
13
14
15
16
...
»

Содержание Low Light LED Analyser











































































Отзывы:

Нет отзывов