INF-TN1FSH-E
- 129 -
7.14. Pulse Doppler Measurement
Click the “PULSE DOPPLER” button on the Menu screen, and the following screen appears. Click detailed setting
tab, flow speed distribution tab and/or operation information tab when necessary.
* The detailed setting tab and flow speed distribution tab are optional functions.
7.14.1. Detailed setting (optional function)
CAUTION
•
Do not change the setting by yourself. Otherwise measurement may be disabled.
•
Make the detailed setting only when a problem should arise in flow rate measurement with factory default
settings. The setting need not be made in other cases.
Click “Detailed setting”, and the following screen appears.
Fig. 23 <Detail setting screen>
To select an item to be set or read, set the relevant check box to ON (
"
). Not to select (or to reset the selection), set
the relevant check box to OFF (
#
). As to judgment, it can obtain with setting success ratio set, power and deviation
while setting ON with check box of setting lateral-line. However, when read it, disregard selection of multiple lateral-
lines.
[Setting].......................................... Sends the setting of the selected item (check box set to ON (
"
)), reflecting the
response value on the setting.
[READ] .......................................... Reads the setting of the selected item (check box set to ON (
"
)), reflecting the
response value on the setting.
[Save] ............................................. Reflects the setting sent by pressing the [Setting] button on the flowmeter flow
transmitter.
[Check ON/OFF]............................ Set the check box to ON to select all the items (to set all the check boxes to ON
(
"
)). Set the check box to OFF (
#
) to release the selection of all the items (to
set all the check boxes to OFF. (
#
))
