INF-TN1FSH-E
- 123 -
7.9. Total Setting
Click the “TOTAL” button on the Menu screen, and the following screen appears.
Fig. 18 <Total setting screen>
To select an item to be set or read, set the relevant check box to ON (
"
). Not to select (or to reset the selection), set
the relevant check box to OFF (
#
).
[Setting]........................................ Sends the setting of the selected item (check box set to ON (
"
)), reflecting the
response value on the setting. Note that only when “STOP” mode is selected, the
setting of other items is reflected.
[READ] ........................................ Reads the setting of the selected item (check box set to ON (
"
)), reflecting the
response value together with the unit on the setting.
[Save] ........................................... Reflects the setting sent by pressing the [Setting] button on the flowmeter flow
transmitter.
[Check ON/OFF].......................... Set the check box to ON (
"
) to select all the items (to set all the check boxes to
ON (
"
)). Set the check box to OFF (
#
) to release the selection of all the items
(to set all the check boxes to OFF (
#
)).
