FDC Staten, Инструкция по установке и руководство по эксплуатации для владельца дома

Страница: 5 / 8

allow disconnection.
Installation of stove:
Step1:
Unpack carefully and check you
have all items as per the parts
list.
Step2:
Place the stove in the required position. Adjust the feet to
ensure it is level. Open the stove door and arrange the
vermiculite , glass pebbles and imitation logs on the
plastic surface in a pleasing arrangement of your choice.
See Typical Fuel Bed Arrangement as a guide
OPERATION
This appliance can be operated by both remote control and manual buttons. Once the
unit has been properly connected to an earthed electrical outlet turn on the main
switch. A beep should be heard when the power is first applied.
Operating by Manual Buttons
Flame Button
Heater Button
Main Switch
Main switch
The main switch supplies power to all functions of the stove. This switch must be in the
“ON” position for any of the functions including the remote to operate.
Flame button
Press the FLAME button to cycle through the four flame effects.
Heater button
Press once to turn the fan on, 10s later Low heat will come on.(Lights illuminated
●○
)