FDC ENIGMA II SLIMLINE, Руководство пользователя, Страница: 5 / 24

LT4934 (1:01/08)
5
ENIGMA II SLIMLINE Users Instructions
SECTION THREE Fuel Bed Layout
It is important that all the fuel bed and moulded shapes are positioned as shown in these
instructions.
Two Alternative Fuel beds are available: -
A) Coal
B) Pebble
Identify the fuel bed and assemble as shown below.
COAL FUEL BED
Some soot deposits will form on the coals, this is perfectly normal and adds to the
realism of the appliance. Some heat discolouration of the firebox sides is also perfectly
normal and does not detract from the operation of the fire.
USE ONLY THE COALS PROVIDED AND NO ADDITIONAL COALS MUST ADDED .
The Loose coal set consists of: -
• Rear Matrix
• Front Coal
• Loose Coals – 20 ripped coals.
• Ensure the rear matrix is in position
as shown.
Positioned well back
against the rear of the appliance.
Make sure that it does NOT sit on
top of the burner outlet slot as
shown.
• Ensure the front coal is in front of
the burner slot and centralised as
shown.