FCAR Series Product
Operation Manual Instruction
3
Chapter I Production Introduction
1.1 Introduction and Features for F6 Plus
Petrol version of F6 PULS is the diagnostic equipment for almost every gasoline engine vehicle in the world. It has the
industrial tablet hosts with the features of waterproof, anti-drop, and anti-oil pollution, which can be used under a variety
of harsh environments to meet users needs;
It has a wild range of diagnosis. Chinese cars, Asian cars, European cars, American cars, and the standard OBD II
models all can be diagnosed by it. Also, it diagnoses the 12 common special functions, etc.;
It contains comprehensive functions no matter fault diagnosis or maintenance help or synchronous repair learning,
etc.;
It supports one key upgrade. You can update model procedures to ensure the most complete and most accurate
diagnosis anytime and anywhere in the state of the network connection;
It can remote diagnose your vehicles. FCAR engineers can assist you with vehicle diagnosis, maintenance and other
guidance.
1.2 Care and Maintenance
1.2.1 Storage Environment
1) Store the product on a flat and dry place with suitable temperature.;
2) Never put the product in direct sunlight or near to the heating source;
3) Never put the product in a magnetic field;
4) Avoid smoke erosion, water and oil splashing;
5) Avoid shock, dust, moisture and extremely high temperature;
6) If main unit is dirty, power off the machine, then clean the housing case with soft cloth.
1.2.2 Host and VCI box protection
1) Handle it with care and avoid collision;
2) Be careful to plug and unplug the main cable and diagnostic connector. Tighten the screw before operation to avoid
unexpected disconnecting and/or damage to the diagnostic port;
3) Put back the test cable and connectors, and other accessories to the box to avoid loss.
1.2.3 Touch screen Care
1) Dust may be accumulated on the LCD screen due to electrostatic. You are suggested to buy the special LCD screen wiper
to clean the screen gently;
2) Don’t wipe the screen with bare finger to avoid fingerprint attached. Never use chemicals to clean the screen;
3) Never put FCAR product close to the electromagnetic wave products to avoid any effect on the screen;
4) Never put FCAR product in direct sunlight or ultraviolet radiation for long time to avoid shortening the service life of the
screen.
