FCA US RAM 1500 2017 Скачать руководство пользователя страница 117 | Manualshive

Страница: 117 / 710

FCA US RAM 1500 2017 Скачать руководство пользователя страница 117

“Slide-On-Rod” Features Of Sun Visor — If
Equipped

The sun visor “Slide-On-Rod” feature allows for additional
flexibility in positioning the visor to block out the sun.

To use the “Slide-On-Rod” feature, rotate the sun visor
downward and unclip it. Pull the sun visor along the
“Slide-On-Rod” until the sun visor is in the desired posi-
tion.

SEATS

Seats are a part of the Occupant Restraint System of the
vehicle.

WARNING!

•

It is dangerous to ride in a cargo area, inside or
outside of a vehicle. In a collision, people riding in
these areas are more likely to be seriously injured or
killed.

•

Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat belts.
In a collision, people riding in these areas are more
likely to be seriously injured or killed.

•

Be sure everyone in your vehicle is in a seat and
using a seat belt properly.

“Slide-On-Rod” Extender

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

115

«
...
115
116
117
118
119
...
»

Содержание RAM 1500 2017







































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов