FCA US GRAND WAGONEER 2022, Руководство пользователя, Страница: 197 / 432

STARTING AND OPERATING 195
(Continued)
The system may not be able to detect pedestrians
or animals in the following situations:

Pedestrian/animal is outside of the detection
range

Pedestrian/animal is fully or partially covered

Pedestrian/animal does not reach the minimum
detection height
NOTE:
Other objects on the road that meet the
height/shape/temperature (e.g. sun exposure) of
pedestrians/animals may be detected and clas -
sified as targets.
S
ERVICE
T
HE
N
IGHT
V
ISION
S
YSTEM
When service conditions are present, the following
fault messages may appear in the instrument
cluster display when the vehicle is placed in the ON
position.
If "Night Vision Unavailable Sensor Blocked"
appears in the instrument cluster display, make
sure the camera is clear of snow, ice, mud, dirt or
other debris. The camera is located in the upper
fascia/bumper, inside the driver side grille slot.
Clean the camera using a soft wet cloth or by
pressing the Clean Camera soft button in the
Uconnect system. If the message continues to
appear after cycling the ignition, see an authorized
dealer.
If “Night Vision Temporarily Unavailable” or “Night
Vision Unavailable Service Required" appears in
the instrument cluster display after cycling the
ignition, see an authorized dealer.
The camera must be properly aligned to work
correctly. If the camera needs adjustment, see an
authorized dealer. Do not attempt to adjust the
camera yourself.
NOTE:
Alignment and performance of the Night Vision
may be affected by aftermarket modifications.
Mopar® parts should be used to get the optimal
performance of this system.
N
IGHT
V
ISION
S
YSTEM
L
IMITATIONS
The Night Vision display is deactivated under the
following conditions:

Vehicle is shifted into REVERSE

The ignition is not in the ON/RUN position

The headlights are off and the vehicle speed is
greater than 8 mph (13 km/h)
The Night Vision display warnings are suppressed
under the following conditions:

Daylight hours

Temperatures above 86°F (30°C)
WARNING!

Night Vision can only detect pedestrians and
animals located within the range of the
infrared camera.

Night Vision may not detect pedestrians or
animals and highlight them if:

They are not in an upright position, for
example if they are sitting or lying down, or
if the pedestrian is riding a bicycle

The figure in the display appears incom -
plete, for example because the pedes -
trian or animal is partially behind a vehicle

The pedestrian/animal is not directly
ahead in the coverage area

The pedestrian/animal is part of a group

The pedestrian is wearing certain types of
clothing

The pedestrian/animal is moving too
quickly through the field of view

The sensor is blocked by dirt, rain, snow,
or ice
WARNING!
4
22_WS_OM_EN_USC_t.book Page 195