FCA US DODGE CHARGER RWD 2019, Руководство пользователя

Страница: 219 / 244

Get Started
All you need to control your Uconnect system
with your voice are the buttons on your steering
wheel.
Helpful hints for using Voice Recognition:
• Visit UconnectPhone.com to check mobile
device and feature compatibility and to find
phone pairing instructions.
• Reduce background noise. Wind and passen-
ger conversations are examples of noise that
may impact recognition.
• Speak clearly at a normal pace and volume
while facing straight ahead. The microphone
is positioned on the rearview mirror and aimed
at the driver.
• Each time you give a Voice Command, you
must first push either the Voice Recognition
(VR) or Phone button, wait until
after the
beep, then say your Voice Command.
• You can interrupt the help message or system
prompts by pushing the VR or Phone button
and saying a Voice Command from the current
category.
Basic Voice Commands
The basic Voice Commands below can be given
at any point while using your Uconnect system.
Push the VR button . After the beep, say:
• “ Cancel ” to stop a current voice session
• “ Help ” to hear a list of suggested Voice Com-
mands
• “ Repeat ” to listen to the system prompts
again
Notice the visual cues that inform you of your
voice recognition system’s status. Cues appear
on the touchscreen.
Radio
Use your voice to quickly get to the AM, FM or
SiriusXM Satellite Radio stations you would like
to hear. (Subscription or included SiriusXM Sat-
ellite Radio trial required.)
Push the VR button . After the beep, say:
• “ Tune to ninety-five-point-five FM”
• “ Tune to Satellite Channel Hits 1”
Uconnect Voice Command Buttons
1 — Push To Initiate Or To Answer A
Phone Call, Send Or Receive A Text
2 — For All Radios: Push To Begin Radio,
Media, Or Climate Functions. For 8.4–
inch System Only: Push To Begin Naviga-
tion Function
3 — Push To End Call
217