FAZUA RIDE 60, Руководство по обслуживанию

Страница: 54 / 63

53
English | Service Handbook
Main menu
3.8 Command and calibration
HERE YOU CAN FIND THE VIDEO
This menu contains two functions: First, the motor can be actuated to observe the values in the
"3.3 Live data"
menu. Second, the torque sensor can be automatically calibrated here.
A
TEST DRIVE MODE
In this section, you can give the motor the command to run in order
to have the system values displayed in the menu item
"3.3 Live
data" . This means you can check unusual noises, for example,
directly in the workshop.
The torque and the maximum motor speed are entered here.
A value between 200 – 400 mNm is recommended for the torque.
With regard to motor speed, 500 rpm equals approx. 10 rpm on the
crank, 1,000 rpm equals approx. 20 rpm on the crank, and so on.
B
TESTING ACTIVE
Actuate the switch and set it to Testing active to continue.
C
SET VALUES As soon as the
Set values
button has been actuated, a pop-up
window opens to inform you that the motor is starting up.
ATTENTION! Activating the test drive mode puts the rear
wheel, chain, and pedals into motion! Please observe
the general safety instructions!
Continue to start the motor.
Change to the Live data menu and actuate the Play button there
to view the live system values. (For more details, see Chapter
"3.3 Live data")
D C
A
B
E