FAZUA RIDE 60, Оригинальное руководство пользователя

Страница: 81 / 96

Original instructiOns | English
81
22 CLEANING AND MAINTAINING THE CONTROL ELEMENT AND
DISPLAY
WARNING
Danger from accidental starting!
If the drive system is set in motion while you are handling it, you may
injure yourself.
►
Be careful not to start the drive system unintentionally when
cleaning the control element. If necessary, remove the battery
before cleaning to prevent unintentional start-up*.
NOTE
Risk of damage!
Improper cleaning may damage the control element or display.
►
Never immerse the control element and display in water or other
liquids for cleaning.
►
Do not use aggressive cleaning agents for cleaning.
►
Do not use sharp, angular or metallic cleaning objects when
cleaning.
→
Always keep all components of the e-bike and the drive system in a clean
condition.
→
Clean the exterior of the control element and display gently with a cloth or soft
brush.
→
If necessary, use a mild soap solution for the external removal of coarser
soiling.
IMPORTANT: Dampen the cloth only slightly or wring it out well to prevent
liquid from penetrating the inside of the housing and the connections. If liquid
enters the inside of the housing or the connections, the control element and
the display may be damaged.
→
Wipe all surfaces dry after cleaning.
* This applies only if your e-bike is equipped with a removable battery (See Chapter 23 “Function and model variu-
ants of the battery”).