Freigabeversion
Original instructions | US-English
61
When the BATTERY is switched on, the charge level indicator
[D.4]
initially shows a
start animation sequence and then immediately afterwards the LEDs briefly indicate
the current charge level of the BATTERY. The charge level indicator then goes out.
Checking the current charge level of the BATTERY
→
With the BATTERY switched on, press the on/off button
[D.5]
on the BATTERY
once to check the charge level (e.g. before or during a (longer) trip).
Depending on the charge level, the number of LEDs varies, with each LED
representing 20 % of the capacity. If all five LEDs are illuminated, the BATTERY
is fully charged.
Checking the SOH
→
With the BATTERY switched on, press (double-click) the on/off button
[D.5]
on
the BATTERY twice in succession to check the SOH (“state of health”) of the
BATTERY.
The SOH is displayed in 20 % increments (similar to the charge level indicator
on the BATTERY): If all five LEDs are flashing, the BATTERY has a SOH of 100 %,
if four LEDs are flashing, 80 %, etc.
27.6 Automatic BATTERY shutdown
The BATTERY switches off automatically if the e-bike has not moved for 8 hours
and no buttons or touch sensors have been pressed on the REMOTE. If the charge
level of the BATTERY is below 30%, the BATTERY switches off automatically after
3 hours instead of after 8 hours.
→
Press the on/off button
[D.5]
on the BATTERY once to turn on (wake up) the
BATTERY again.
27.7 Charging the BATTERY
DANGER
Fire hazard due to incorrect handling!
Improper handling of the BATTERY or attempting to charge batteries
with an incompatible charger could cause a fire.
►
Always use an original and compatible CHARGER from FAZUA to
charge the BATTERY.
►
The BATTERY and CHARGER heat up during charging, so keep them
away from combustible materials.
►
Do not leave the BATTERY and CHARGER unattended during charging.
