Freigabeversion
US-English | Original instructions
44
3. Hold the locking lever
[A.5]
in the open position and carefully lower the
DRIVEPACK at the same time.
4. Then move the locking lever back to the closed position and remove the
DRIVEPACK from the interface
[B.1]
on the BOTTOM BRACKET.
B.1
A.1
16.3 Securing/locking the DRIVEPACK on the e-bike
Depending on the model, a cylinder lock
[A.6]
is integrated into the frame of your
e-bike, which you can use to lock the DRIVEPACK mounted on the e-bike and there-
fore secure it against theft, etc.
1. If necessary, make sure that the DRIVEPACK is attached to the e-bike correctly.
2. Insert the key
[A.7]
into the cylinder lock.
3. Turn the key counterclockwise to lock the DRIVEPACK on
the e-bike.
4. Remove the key from the cylinder lock.
In order to unlock the DRIVEPACK again:
1. Insert the key
[A.7]
into the cylinder lock.
2. Turn the key clockwise to unlock the DRIVEPACK on the
e-bike.
A.7
A.7
