FAZUA RIDE 50 STREET Скачать руководство пользователя страница 18

Страница: 18 / 68

English | Original instructions

3.4 Instructions for safe riding in road traffic

By following the instructions listed below for safe riding in road traffic, you can

reduce the risk of accidents and injuries when riding a bicycle or e-bike.

The term “road traffic” also refers to publicly accessible private areas

and publicly accessible field or forest paths.

→

Only ride your e-bike in road traffic if the equipment complies with national

road traffic regulations. If appropriate, ask your e-bike manufacturer for

further information.

→

Find out about the applicable road traffic regulations of the country or region,

including for example, from the Ministry of Transport. Always keep yourself

informed regarding changes in the content of the valid regulations.

→

Observe and follow the country-specific and regional road traffic regulations.

→

When riding, use a suitable bicycle helmet that complies with the country-

specific and regional regulations or that is tested according to the DIN EN 1078

standard and bears the CE mark.

→

When riding, wear light-coloured clothing with reflective elements to attract

the attention of other road users.

→

Do not ride your e-bike if you are under the influence of alcohol, intoxicants or

medication that could impair your ability to ride safely.

→

Do not use mobile devices such as smartphones, MP3 players or similar while

riding.

→

Do not distract yourself with other activities while riding, such as turning on

lights. Stop first to carry out these types of activities.

→

Never drive with your hands off the handlebars. Always keep both hands on

the handlebars.

→

Ride carefully and show consideration for other road users.

→

Ride in such a way that no-one is injured, endangered, hindered or harassed.

→

Ride on prescribed lanes for bicycles, where available.

Содержание RIDE 50 STREET




































































Результаты поиска

Содержание RIDE 50 STREET

Отзывы:

Похожие инструкции для RIDE 50 STREET

Бренды по названию

Популярные бренды

FAZUA RIDE 50 STREET, Оригинальное руководство пользователя

Результаты поиска

Содержание RIDE 50 STREET

Отзывы:

Похожие инструкции для RIDE 50 STREET

Бренды по названию

Популярные бренды