Fayat DYNAPAC DRP15D, Инструкция по эксплуатации, Страница: 98 / 112

3. Remove dried dirt with a suitable brush from all cooling fins
and cooling air intake openings.
4.
CAUTION!
Danger of eye injuries caused by particles
flying around!
– Wear your personal protective equipment
(protective gloves, protective clothing,
goggles).
Blow out the cooling fins and cooling air intake openings with
compressed air.
5. In case of damp or oily contamination you should consult our
customer service department.
8.9.3 Servicing the V-belt
Protective equipment: n Working clothes
n
Safety shoes
n Protective gloves
1. Park the machine safely Ä Chapter 6.5 ‘Parking the machine
in secured condition’ on page 60 .
2. Allow the engine to cool down.
3. Unscrew the V-belt guard (1).
4. Check condition and tension of V-belt.
ð
Compression measurement: 10
-
30 mm (0.4
-
1.2 in).
5.
The V-belt cannot be re-tightened.
Replace the V-belt if it is damaged or if the compression
measurement is exceeded
Ä
Chapter 8.7.5 ‘Replacing the
V-belt’ on page 84 .
Fig. 123
1
B-692-0151
Fig. 124
B-GEN-0122
Fig. 125
Maintenance – As required
DRP15D 98