Fayat Dynapac DR7X Скачать руководство пользователя страница 42

Страница: 42 / 110

5.3 Checking the engine oil level

NOTICE!
Danger of engine damage!

–

+Use only oil of the permitted specification

Chapter 8.2.1 „Engine oil“ on page 63

The engine cannot be started if the engine oil level

is too low.

Protective equipment:

Working clothes

Protective gloves

Park the machine so that the tamper foot is in horizontal posi-

tion.

Clean the area around the oil dipstick (1).

Unscrew the dipstick and wipe it clean with a lint-free, clean

cloth.

Insert the dipstick into the oil filler socket, do not screw it in,

but pull it out again to check the oil level.

NOTICE!
Danger of engine damage!

–

Do not overfill the engine.

The oil level must always be between the "MIN"- and "MAX"-

marks. If the oil level is too low, top up oil to the "MAX" mark

immediately.

Fig. 18

Checks prior to start up – Checking the engine oil level

DR7X

Содержание Dynapac DR7X















































































































Результаты поиска

Содержание Dynapac DR7X

Отзывы:

Похожие инструкции для Dynapac DR7X

Бренды по названию

Популярные бренды

Fayat Dynapac DR7X, Руководство по эксплуатации

Результаты поиска

Содержание Dynapac DR7X

Отзывы:

Похожие инструкции для Dynapac DR7X

Бренды по названию

Популярные бренды