manualshive.com logo in svg

Fayat DYNAPAC DFP8, Инструкция по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Fayat DYNAPAC DFP8 Скачать руководство пользователя страница 97

8.9.7  Measures prior to extended shut-down period

8.9.7.1 

Measures before shutting down

DANGER!
Danger to life caused by explosive gas-air

mixes!

–

Do not allow gasoline to come into contact with

hot components.

–

Smoking and open fire is prohibited.

–

Keep away from heat sources, sparks and

other sources of ignition.

–

Do not spill any gasoline.

If the machine is shut down for a longer period of time, e.g. winter

season, the following work must be carried out.

Depending on weather influences these conservation measures

will protect the machine for approx. 6 to 12 months.

1.

Park the machine safely

 

Ä

 Chapter 6.5 ‘Parking the machine

in secured condition’ on page 62

.

2.

Allow the engine to cool down for at least 30 minutes.

3.

Clean the machine thoroughly.

4.

Change the engine oil

 

Ä

 Chapter 8.7.1 ‘Changing the engine

oil’ on page 79

.

5.

Use fuel stabilizer or empty the fuel tank completely.

1.

Mix fresh fuel with fuel stabilizer (follow the instructions of the

manufacturer).

2.

Empty the fuel tank and fill it with the prepared fuel mix.

3.

Start the engine and run the machine for approx. 10 minutes

in the open.

4.

Park the machine in secured condition.

1.

Close the fuel valve.

Using fuel stabilizer

Emptying the fuel tank

B-HON-0036

Fig.  104

Maintenance – As required

 

DFP8

 

97

Содержание DYNAPAC DFP8















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды