Fayat BOMAG BW 213 D-4, Руководство по эксплуатации

Страница: 98 / 178

6.2.2 Fuel
6.2.2.1 General
You should only use commercially available brand diesel fuel with
a sulphur content below 0.5% and ensure strict cleanliness when
filling in. A higher sulphur content has a negative effect on the oil
change intervals.
The fuel level should always be topped up in due time so that the
fuel tank is never run dry, as otherwise filter and injection lines
need to be bled.
6.2.2.2 Fuel quality
The following fuel specifications are permitted:
n EN 590
n DIN 51628
n ASTM D975 Grade-No. 1-D and 2-D.
n JIS K 2204 Grade Fuel 1 and Grade Fuel 2 with lubrication
properties acc. to EN 590
6.2.2.3 Winter fuel
For winter operation use only winter diesel fuel, to avoid clogging
because of paraffin separation.
At very low temperatures disturbing paraffin separation can also be
expected when using winter diesel fuel.
Diesel fuels suitable for temperatures down to -44 °C (-47 °F) are
available for Arctic climates.
NOTICE!
Danger of engine damage!
– The admixture of petroleum and the addition of
"flow enhancing additives" (fuel additives) is not
permitted.
6.2.2.4 Storage
Even traces of zinc, lead and copper can cause deposits in the
injection nozzles, especially in modern Common-Rail injection sys-
tems.
Zinc and lead coatings in refuelling systems and fuel lines are not
permitted.
Copper containing materials (copper lines, brass items) should be
avoided, because they can cause catalytic reactions in the fuel with
subsequent depositing in the injection system.
Maintenance
BW 213 D-4 98