Fayat BOMAG BW 124 PDH-5 Скачать руководство пользователя страница 39

Страница: 39 / 210

3.4.6

Safety regulations and environmental protection regula-
tions for handling battery acid

WARNING!
Danger of cauterization with acid!

– Wear your personal protective

equipment (protective gloves,

protective clothing, goggles).

– Do not allow clothes, skin or

eyes to come into contact with

acid.

– Rinse off spilled battery acid

immediately with lots of water.

Rinse acid off clothes, skin or eyes

immediately with lots of clean water.
Immediately call for medical advice

in case of cauterization.

WARNING!
Danger of injury caused by

exploding gas mixture!

– Remove the plugs before starting

to recharge the battery.

– Ensure adequate ventilation.
– Smoking and open fire is pro-

hibited!

– Do not lay any tools or other

metal objects on the battery.

– Do not wear jewellery (watch,

bracelets, etc.) when working on

the battery.

– Wear your personal protective

equipment (protective gloves,

protective clothing, goggles).

Fig. 8:

Concerning your safety – Handling fuels and lubricants

BW 124 PDH-5

Содержание BOMAG BW 124 PDH-5



















































































































































































































Результаты поиска

Содержание BOMAG BW 124 PDH-5

Отзывы:

Бренды по названию

Популярные бренды

Fayat BOMAG BW 124 PDH-5, Инструкция по эксплуатации, Инструкция по обслуживанию

Результаты поиска

Содержание BOMAG BW 124 PDH-5

Отзывы:

Бренды по названию

Популярные бренды