manualshive.com logo in svg

Fayat BOMAG BW 120 AD-5, Инструкция по эксплуатации

Поделиться
Скачать
Fayat BOMAG BW 120 AD-5 Скачать руководство пользователя страница 136

8.2  Preparations/concluding work

Certain maintenance tasks require prepara-

tions and concluding activities.
This includes e.g. opening and closing mainte-

nance flaps and maintenance doors as well as

securing certain components.
After this work close all maintenance flaps and

doors again and return all components to their

operating condition.

8.2.1  Engine hood
8.2.1.1  Open and secure the engine hood

1.

Open the locking.

2.

Push the hood to top position.

ð

The hood is raised supported by the gas

springs.

8.2.1.2  Closing the engine hood

1.

Push the hood at the handle into initial

position.

2.

Lock the hood.

B-880-0192

Fig.  114

B-880-0193

Fig.  115

Maintenance – Preparations/concluding work

 

BW 120 AD-5

 

136

Содержание BOMAG BW 120 AD-5



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды