Fayat BOMAG BPR 25/40 D Скачать руководство пользователя

Страница: 45 / 79

6.4 Running-in instructions

The following maintenance work must be performed when

running in new machines or overhauled engines:

NOTICE!

During the running-in period, up to approx. 200 oper-

ating hours, check the engine oil level twice every day.

Depending on the load the engine is subjected to, the

oil consumption will drop to the normal level after

approx. 100 to 200 operating hours.

After 25 operating hours

Change the engine oil.

Check engine and machine for leaks.

Retighten the fastening screws on air filter exhaust, fuel tank

and other attachments.

Retighten the bolted connections on the machine.

Check the vibration drive V-belts.

Check the oil level in the vibrator housing.

Maintenance

BPR 25/40 D - BPR 25/50 D

Go to

Discount-Equipment.com

order your parts

Содержание BOMAG BPR 25/40 D
















































































Результаты поиска

Содержание BOMAG BPR 25/40 D

Отзывы:

Похожие инструкции для BOMAG BPR 25/40 D

Бренды по названию

Популярные бренды

Fayat BOMAG BPR 25/40 D, Руководство по эксплуатации

Результаты поиска

Содержание BOMAG BPR 25/40 D

Отзывы:

Похожие инструкции для BOMAG BPR 25/40 D

Бренды по названию

Популярные бренды