Fayat Bomag BP 25/50 Скачать руководство пользователя

Страница: 17 / 100

Safety goggles

To protect the eyes against airborne particles and fluid

squirts.

Face protection

To protect the face against airborne particles and fluid

squirts.

Hard hat

To protect the head against falling parts and to protect

against injuries.

Hearing protection

To protect the hearing against too loud noise.

3.1.4 Intended use

This machine must only be used for:

Compaction of all types of soils

Repair work on all types of soil

Paving of walkways

Work in trenches

Underfilling and compaction of hard shoulders

Intended use also includes compliance with the specified oper-

ating, maintenance and repair measures.

3.1.5 Unintended use

Dangers may arise from the machine when it is used for purposes

other than the one it is intended for.

Any danger caused by intended use is the sole responsibility of the

customer or driver/operator, the manufacturer cannot be made

liable.

Examples for unintended use are:

dragging the machine along as a measure of transportation

throwing the machine off the transport vehicle

attaching an additional weight to the machine

It is not permitted to stand on the machine while working.

Concerning your safety – General prerequisites

BP 25/50

Discount-Equipment.com

order

your

parts

Содержание Bomag BP 25/50





































































































Результаты поиска

Содержание Bomag BP 25/50

Отзывы:

Похожие инструкции для Bomag BP 25/50

Бренды по названию

Популярные бренды

Fayat Bomag BP 25/50, Инструкция по эксплуатации, Инструкция по обслуживанию

Результаты поиска

Содержание Bomag BP 25/50

Отзывы:

Похожие инструкции для Bomag BP 25/50

Бренды по названию

Популярные бренды