Fayat Group DYNAPAX DRP45DX Скачать руководство пользователя страница 57

Страница: 57 / 118

6.3 Work mode

Operate the machine only with the steering rod folded down and

adjusted to height

Chapter 6.1 ‘Folding down and adjusting the

steering rod’ on page 54

Guide the machine only by means of the steering rod.

Guide the machine so that your hands do not hit against solid

objects.

Keep feet clear of the vibrating base plate.

CAUTION!
Danger of injury caused by uncontrolled

machine movement!

–

Always hold on to a running machine.

–

Always keep an eye on a running machine.

Protective equipment:

Hearing protection

Working clothes

Safety shoes

Make sure that nobody is in the danger zone.

NOTICE!
The centrifugal clutch may be damaged!

–

Operate the machine only with full

throttle.

Set the throttle lever to position “MAX”.

Shift the handle forwards.

The machine vibrates forward with a speed which corre-

sponds to the travel lever position.

B-695-0059

Fig. 45

B-695-0057

Fig. 46

Operation – Work mode

DRP45DX

Содержание DYNAPAX DRP45DX























































































































Результаты поиска

Содержание DYNAPAX DRP45DX

Отзывы:

Похожие инструкции для DYNAPAX DRP45DX

Бренды по названию

Популярные бренды

Fayat Group DYNAPAX DRP45DX, Инструкция по эксплуатации, Инструкция по обслуживанию

Результаты поиска

Содержание DYNAPAX DRP45DX

Отзывы:

Похожие инструкции для DYNAPAX DRP45DX

Бренды по названию

Популярные бренды