Fayat Group DYNAPAC S100, Руководство по эксплуатации и техническому обслуживанию

Страница: 23 / 101

P a g e 23 | 101
Maintenance
EVERY DAY:
Check levels and top up fuel, engine oil and hydraulic oil.

Check for leaks

Check and clean the air filter if necessary

Check that all nuts and bolts are tight

Clean the machine

Check that the controls are neither damaged nor jammed

Lubricate the movement control cables and gates control cables

Make sure the movement control automatically returns to neutral

Repair or replace if necessary

OTHERWISE DO NOT USE THE MACHINE!
AFTER THE FIRST 20 HOURS OF USE:

Change the engine oil filter (refer to Honda manual - attached)

Clean the engine air filter (refer to Honda manual – attached)

Change the hydraulic filter and the hydraulic oil

Check the drive belt

Adjustments if necessary
AFTER THE FIRST 100 HOURS OF USE:

Change the filter and the transmission oil (refer to HydroGear manual – attached)
EVERY 100 HOURS OF USE OR EVERY 6 MONTHS:

Change the engine oil

Change the fuel filter

Clean or replace the air filter

Check the drive belt and adjust if necessary
EVERY 400 HOURS OF USE OR EVERY YEAR:

Change the hydraulic filter and oil

Change the filter and the transmission oil (refer to HydroGear manual – attached)

Change the drive belt

Check and replace the hydraulic pump if necessary
See the Honda manual for specific engine maintenance (refer to Honda manual – attached)