manualshive.com logo in svg

Fayat Group DYNAPAC DRP15X, Оригинальная инструкция по эксплуатации

Оригинальные руководящие инструкции по эксплуатации для продукта Fayat Group DYNAPAC DRP15X доступны для бесплатного скачивания на нашем сайте. Загляните на manualshive.com и получите руководство, чтобы освоить все возможности этого устройства. Узнайте, как максимально эффективно использовать ваш DYNAPAC DRP15X с нашим руководством.

Поделиться
Скачать
background image

8.8  Annually

8.8.1  Replacing the spark plug

NOTICE!
Danger of engine damage!

–

Do not use spark plugs with incorrect heat

value.

Recommended spark plugs:

NGK

BPR6ES

DENSO

W20EPR-U

Protective equipment:

n

Working clothes

n

Safety shoes

n

Protective gloves

Tool:

n

Spark plug spanner 21 mm

1.

Park the machine safely

 

Ä

 Chapter 6.5 ‘Parking the machine

in secured condition’ on page 61

.

2.

Allow the engine to cool down for at least 15 minutes.

3.

Clean the area around the spark plug.

4.

Remove the spark plug using the spark plug spanner.

5.

Check the electrode gap of the new spark plug with a feeler

gauge, if necessary, adjust the gap.

ð

Nominal value:

 0.7 - 0.8 mm (0.028 - 0.032 in)

6.

To set the electrode distance carefully bend the electrode (1).

7.

Screw in the new spark plug carefully by hand.

8.

Once the sealing surface of the new spark plug is in contact,

tighten for another 1/2 turn with the spark plug spanner.

B-HON-0048

Fig.  81

1

B-HON-0031

Fig.  82

Maintenance – Annually

 

DRP15X

 

81

Содержание DYNAPAC DRP15X

























































































































Отзывы:

Нет отзывов

Похожие инструкции для DYNAPAC DRP15X

Бренды по названию

Популярные бренды

Загрузить еще бренды