Fayat Group DYNAPAC DFP7AX Скачать руководство пользователя страница 30

Страница: 30 / 114

3.7 Operation

3.7.1 Persons in the danger area

Before taking up work, also after breaks, you should always con-

vince yourself that the danger zone is free of persons or obstruc-

tions.

Give warning signals, if necessary. Stop work immediately if per-

sons remain in the danger zone, despite the warning.

3.7.2 Operation

Guide the machine only by the guide handle.

Guide the machine so that your hands do not hit against solid

objects.

Watch out for unusual noises and development of smoke. Perform

trouble shooting and have the fault corrected.

Always keep a safe distance to excavation pit borders, embank-

ments and edges.

Refrain from any work that could adversely affect the stability of the

machine.

Observe the daily vibration load (work safety acc. to 2002/44/EC).

3.7.3 Parking the machine

Park the machine on horizontal, level, firm ground.

Before leaving the machine:

Shut down the engine,

Secure the machine against accidental tipping over,

Secure the machine against unauthorized use.

Mark machines, which could be in the way, with a clearly visible

sign.

Concerning your safety – Operation

DFP7AX

Содержание DYNAPAC DFP7AX



















































































































Результаты поиска

Содержание DYNAPAC DFP7AX

Отзывы:

Бренды по названию

Популярные бренды

Fayat Group DYNAPAC DFP7AX, Инструкция по эксплуатации

Результаты поиска

Содержание DYNAPAC DFP7AX

Отзывы:

Бренды по названию

Популярные бренды