Fayat Group Bomag BVT 65, Инструкция по эксплуатации, Инструкция по обслуживанию

Страница: 80 / 97

6. Secure the coil against winding up. For this purpose tie the
coil (2) to the housing (5) with a cable strap (1).
7. Untie the knots of the starter rope at both ends and remove
the old starter rope.
8. Thread in the new starter rope (3) and fix it with knots on
both ends.
9.
CAUTION!
Danger of injury caused by the starter handle
hitting against your body!
– Do not let the starter handle hit back.
Remove the fixing of the coil and run the starter handle
slowly back to initial position.
10. Pull the starter handle to check the function and light move-
ment of the recoil starter.
11.
NOTICE!
The recoil starter may get damaged!
– Do not mix up the fastening screws for the
recoil starter by mistake.
Assemble the recoil starter.
8.7.6 Changing the oil in the tamper foot
NOTICE!
Components may get damaged!
– Drain tamper foot oil only at operating temperature.
– Ensure strict cleanliness.
– Use only tamper oil of the permitted specification.
– Filling quantity:
Ä
Chapter 8.3 ‘List of fuels and
lubricants’ on page 67 .
Fig. 80
Fig. 81
Fig. 82
1 Pipe clamp
2 Screw M6x12 with washer
3 Screw M6x8
4 Screw M6x16 with washer
Maintenance – Annually
BVT 65 84
Go to
Discount-Equipment.com
to
order your parts