Fayat Group Bomag BVT 65 Скачать руководство пользователя

Страница: 28 / 97

3.7 Operation

3.7.1 Persons in the danger area

Before taking up work, also after breaks, you should always con-

vince yourself that the danger zone is free of persons or obstruc-

tions.

Give warning signals, if necessary. Stop work immediately if per-

sons remain in the danger zone, despite the warning.

3.7.2 Operation

Steer the machine only be the steering bow.

Guide the machine so hat your hands do not hit against solid

objects.

Watch out for unusual noises and development of smoke. Perform

trouble shooting and have the fault corrected.

3.7.3 Parking the machine

Park the machine on horizontal, level, firm ground.

Before leaving the machine:

Shut down the engine,

Secure the machine against accidental tipping over,

Secure the machine against unauthorized use.

Mark machines, which could be in the way, with a clearly visible

sign.

Concerning your safety – Operation

BVT 65

Go to

Discount-Equipment.com

order your parts

Содержание Bomag BVT 65


































































































Результаты поиска

Содержание Bomag BVT 65

Отзывы:

Похожие инструкции для Bomag BVT 65

Бренды по названию

Популярные бренды

Fayat Group Bomag BVT 65, Инструкция по эксплуатации, Инструкция по обслуживанию

Результаты поиска

Содержание Bomag BVT 65

Отзывы:

Похожие инструкции для Bomag BVT 65

Бренды по названию

Популярные бренды