11
10. Release force adjustment
Adjust the tension of the spring with a 3mm hex key.
It is possible to check the regulation level by the position
of the adjusting bolt or counting the number of clicks.
Before start pedaling, try to unclip the shoes several
times to ensure that the release force of the pedal
springs is suited to your needs.
If the release tension is too loose, the pedal may release
unexpectedly.
If, on the contrary, it’s too tight, shoe release may be
impossible when needed.
Both conditions may cause accidents and possible
damages to things and/or people.
The correct direction to clip-out is by twisting outward.
Don’t use ball-end hex keys.
Fig. 12
3
Max
Min
Adjusting
bolt
Min
Max
Adjusting bolt
Fig. 13
